|9770 series power supplies, 9790 power connector kit, FR-7
|Page 1 of 1|
|Author:||PAiA-Scott [ Tue Aug 24, 2010 12:38 pm ]|
|Post subject:||9770 series power supplies, 9790 power connector kit, FR-7|
Skip down to the next post, an update of this one.
Download or view the following pdf for details about the 9770 series power supply, the four-wire power supply connector cables, and the FR-7 Fractional Rack-mount chassis.
It contains information for the Mouser part numbers and the references for building the cables from the 9710 manual.
When soldering the tinned wire ends to the terminal, I use a wooden clothes pin to hold the terminal steady. I flow a tiny bit of solder into the area where the wire end will rest and then position the wire end there and reheat, flowing in a tiny bit more solder. Note if the terminal is slightly angled down during this process, the solder will be less likely to run up to the sprung, contact end of the terminal.
9770_9790_FR7.pdf [385.62 KiB]
Downloaded 2759 times
|Author:||PAiA-Scott [ Thu Mar 07, 2013 12:29 pm ]|
|Post subject:||Re: 9770 series power supplies, 9790 power connector kit, FR-7|
This newer power supply is the preferred choice over 9770 series supplies in a user-specified system of modules installed in the FR-7.
9771-15, Dual-polarity Regulated 15VDC Power Supply
These cable and connector assemblies greatly simplify linking modules to the power supply.
9790 Power Connector Assembly
FR-7 Fractional Rack (FracRak) Chassis kit information
|Author:||PAiA-Scott [ Thu Apr 17, 2014 4:48 pm ]|
|Post subject:||PAiA FR-7 FracRak, FRBlank Panels, assy. page, images|
FR-7 FracRak Fractional Rack-mount Chassis, assembly page
Images, FR-7, FRBlanks
|Author:||PAiA-Scott [ Tue Feb 09, 2016 6:52 pm ]|
|Post subject:||FR7, 9770 Power Supply, FR-PowerWingPanel -- Assembly Pages|
|Page 1 of 1||All times are UTC - 6 hours [ DST ]|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group